Toyota Camry Hybrid 2018 - 2020 4 button proximity key

This product has been temporarily removed from sale as direct result of the Consumer Goods (Products Containing Button/Coin Batteries) Safety Standard 2020 which becomes enforceable on 22nd June 2022 and carries fines of up to $1million. 

All products that contain a button cell or coin type battery must be safety tested to confirm they comply with these new regulations. All button cell batteries must be in a new type of packaging with new labels. 

We are working with all of our suppliers to confirm this compliance before we make the product available for sale again. 

We should have had 18 months to get this compliance but sadly the ACCC did not inform our suppliers or us or pretty much any other industry and we only found out about this new law 4 weeks ago.

Please feel free to email us with the details of what you were looking for and we will give you an update on when we expect it to be back available for sale.

Toyota Camry and Cambry Hybrid 2018 models onward compatible 4 button proximity key or smart key with the PCB part number 231451-0351.

This remote is compatible with genuine part numbers:

89904-06220

89904-06240

Toyota make many very similar looking keys and so to be absolutely certain this key is the same as your key you should check the circuit board number inside.

To do this carefully remove the emergency key blade. Inside the slot where the emergency key is fitted you will see a little slot that the end of the emergency key will fit into. Position the end of the emergency key in this slot and twist to open the case. Once the case is open you will see the circuit board. There is a black plastic cover over the front of the circuit board as shown in the attached photos. Gently lift this plastic cover at the end where the little LED can be seen and you will see the circuit board number.

The circuit board number for this remote is: 231451-0351

On the remote case you may see the following, but this is not a definitive part number - please confirm the circuit board number matches the one above:

FCC ID: HYQ14FBC
IC: 1551A-14FBC

On the front of the circuit board is a plastic cover. Very gently lift this and you will see the circuit board number at the top near the LED.

This key is designed for the Australia market and the remote transmits on dual frequency 312/314 MHz FSK.

The key uses the ID-8A H-CHIP transponder type.

The new key comes with a battery already fitted and a spare battery can be added to your order from the Compatible Items tab also. 

These keys must be programmed to the vehicle using a diagnostic tool plugged into the vehicle. We are licensed to do this or you can take the key to the dealer or a licensed locksmith near where you live.

Many Toyota models after 2018 require a special rolling code security pin code which changes every 30 minutes. This makes programming a spare key more difficult.

We charge $170 to code this type of smart proximity key which requires this special pin code and cut the key blade if we supply the proximity remote key.

We charge $90 to code this type of smart key and cut the key blade if we have supplied the remote and key and the vehicle does not need a rolling code security pin code. 

You will need to call to make an appointment and we will need the vehicle for approx 45-60 minutes.

GEN REF: 89904-06220

MK GEN REF: MK6075 20000

AK REF: NLK-TOY-94-0351-312/314 08613