FKMK8690-02 (DIAG)
New product
This aftermarket 3 button flip key can be used on Iveco Daily van models from 2006 to 2012 using the all black 3 button flip key in the photos. This gives you a much cheaper option as spare key, than a dealer key.
Cutting the key, programming the remote & the transponder chip, is NOT included in the price but can be done at our East Victoria Park workshop.
FKMK8690-02
Warning: Last items in stock!
Availability date:
This key profile can be used with the following Iveco models in the table below:
IVECO MODEL | YEARS |
DAILY | 2006 - 2012 |
THIS TABLE IS INTENDED TO BE USED AS A GUIDE ONLY. IF YOUR KEY LOOKS IDENTICAL TO THE ONES IN THE PHOTOS THEN WE SHOULD BE ABLE TO MAKE YOU A SPARE KEY EVEN IF THE SPECIFIC MODEL DOES NOT APPEAR IN THE TABLE.
This key profile is a JMA FI-16 and has the same key blade as a Silca SIP22.
This SIP22 key profile can also be used with a number of Abarth, Alfa Romeo, Citroen, Fiat, Ford, Iveco, Lancia & Peugeot car & van models.
THE Iveco Daily was shared much of its electronics with the Fiat Ducato and Peugeot Boxer and this key can also be used for those vehcile using an identical key to the original key on the left of the main image.
Some models only featured a 2 button remote and we can also make a 2 button version of this key.
This is a track cut or laser cut key profile and we sure a special milling type cutter to duplicate your key.
The remote features a LOCK - UNLOCK - BOOT buttons where the boot button just unlocks the back door & side door of the van.
Please allow up to 60 minutes for this type of remote key to be cut & coded. It is alwasy best to phone ahead and book an appointment to avoid having to wait even longer.
The main security element in modern car, van or motorcycle keys is the transponder chip. These have been used in most makes from the mid 90's. It is this item that allows the ignition to start the engine. These transponders can come in a few different types and there is more information on this subject in our FAQ section.
In most modern remote keys or flip keys there are 2 main elements, the remote control which often just opens the doors and the transponder chip which holds encrypted security information that allows the vehicle to start with the key is placed in the ignition where this information can be read by the vehicle's computer.
Having even a manual key as a spare can save a lot of stress and expense later and is much cheaper then having a spare remote key or flip key.
A few things to consider would be:
When the car is locked using the remote and then opened with the key, does it set off the alarm? This is common in some car makes with the alarm going off until the car is started. Always a good idea to check this before getting a copy made as if you are sharing the car with another user who uses the remote your neighbours may not be too pleased with the regular early morning car alarm calls. If the key is intended to only be a spare then it will not matter as much.
A transponder key is essentially waterproof as it does not contain a battery and so if you like surfing, boating, kayaking, stand up paddle boarding, fishing or any other water based activities where you have to lock your vehicle and leave it unattended for a while this kind of key will allow you to lock the car and bring the key with you without fear of any water damage as would be the case with a remote key or flip key.
Having a spare transponder key can save you thousands of dollars should you lose your main every day key. Losing your only key with some brands of cars can be a massive headache, involving towing your vehicle to a dealer, having to have the immobilizer box replaced, having all the lock barrels replaced and having the ignition barrel replaced. You may be without your vehicle for up to a week.
Of course this is a worst case scenario and with some makes and models a new key can be cut and coded to your vehicle even is all the keys are lost but even then this is still a much more expensive and stressful procedure than simply having a spare key made.
WARNING! KEEP BATTERIES OUT OF REACH OF CHILDREN. Never allow children to replace button batteries on any device. Swallowing or placing a button cell battery inside any part of the body may lead to severe or fatal injuries in as little as 2 hours or less due to chemical burns and potential perforation of the oesophagus.
If you suspect your child has swallowed a button battery or placed inside any part of the body, immediately call the POISONS INFORMATION CENTRE on 13 11 26 for prompt advice. If your child is having any difficulty breathing, contact 000.
Dispose of used button/coin batteries immediately and safely. A battery can still be dangerous even when it can no longer operate the device. Place sticky tape around both sides of the battery and dispose of it immediately out of reach of children in an outside bin or recycle safely.
Please see button battery safety information from the Australian Competition & Consumer Commission (ACCC).
Frequency | 433.92 MHz |
No. of Buttons | 3 BUTTONS |
Shell Colour | BLACK |
Button Colour | BLACK |
Remote Programming Method | DIAGNOSTIC TOOLS REQUIRED |
Transponder Programming Method | DIAGNOSTIC TOOLS REQUIRED |
Dimensions in mm (L x W x D) | 66 x 38 x 18 |
Battery Type | CR2032 - 3V |
LED Color | RED |
CR2032 is a 3 Volt battery and measures 20 mm x 20 mm x 3.2 mm Remote controls for garage doors, swing & sliding gates, home security systems, car alarms, central locking systems use lithium batteries. It is vital to select the correct battery both for fit and function of the device. One of, if not the most reliable lithium battery on the market is...
This service is to cut and program a key we are supplying to your vehicle. We do this for you at our workshop in East Victoria Park W.A. THE VEHICLE MUST BE HERE FOR US TO DO THIS SERVICE - IF YOU DO NOT LIVE IN PERTH YOU CAN PURCHASE A KEY OR REMOTE FROM US AND HAVE IT PROGRAMMED LOCALLY WHERE YOU LIVE
This transponder chip is used with specific cloning devices to either clone already programmed transponder keys or to generate a transponder which can be programmed to a vehicle like an OEM chip would be. K3 - VVDI
Abarth, Alfa Romeo, Citroen, Fiat, Lancia, Peugeot, Gilera & Piaggio compatible flip key blade to suit a variety of aftermarket flip key bodies. Matches Silca sip22 or JMA FI-16 key profile. KD2
Top quality stylish 3 button flip key is very similar in style to the flip keys used on newer model VW vehicles. PCB can be pre-coded to match a huge list of vehicle remotes across most car brands using our special in-house equipment. Red Packet
No customer reviews for the moment.