B29-3-11 (A22-DIAG)
New product
This Subaru 57497AG153 compatible 3 button remote flip key can be used with a number of Subaru vehicles as listed below.
Cutting the key & coding the transponder chip, is NOT included in the price but this service is available at our East Victoria Park workshop.
CAR MUST BE PRESENT AT TIME OF CUTTING KEY - AFTERMARKET LOOK A LIKE KEYS AVAILABLE TOO.
Warning: Last items in stock!
Availability date:
This aftermarket 57497AG153 3 button remote flip key can be used with the following Subaru models in the table below:
SUBARU MODEL | YEAR FROM | YEAR TO |
FORESTER | 2004 | 2009 |
IMPREZA | 2007 | 2011 |
LIBERTY | 2003 | 2009 |
OUTBACK | 2003 | 2009 |
TRIBECCA | 2006 | 2011 |
WRX | 2007 | 2011 |
The information in the table above is intented as a guide only. You may find that you use a key which looks identical to this one but your vehicle is not listed. If so, feel free to email us a photo of your key and the detaqils of your vehicle (YEAR - MAKE - MODEL - VIN) and we will assist you to select the correct item.
This key profile is a JMA SUB-2.P2 and has the same key blade as a Silca DAT 17.
The remote part of this key can be coded manually to your vehicle follwoing the instructions provided but the transponder chip can only be coded to the vehicle using specialist diagnostic equipment by a licensed locksmith, auto electrician or some mechanics.
Subaru Tribeca owners should check the circuit board inside their original key. If it has a small white sticker on it with 8 numbers printed on it, this remote will NOT suit your vehicle.
We can code the key for you at out workshop in East Victoria Park - please call to book an appointment.
Please allow a minimum of 30 minutes and up to 45 minutes for certain keys to be cut & coded.
The main security element in modern car keys is the transponder chip. These have been used in most makes of cars from the mid 90's. It is this item that allows the car ignition to start the engine. These transponders can come in a few different types and there is more information on this subject in our FAQ section.
It is always a good idea to program the remote part of your key before you get the blade cut or the transponder programmed. If the remote programming fails you can then return the item without any issues.
In most remote keys the remote and transponder are separate items with the remote simply opening the doors and the transponder being the security. As a cheap alternative to having 2 remote keys, if you simply want a spare key, a transponder key without a remote can save you a lot of dollars.
We also offer aftermarket flip keys which can be coded to your vehicle instead of this fixed blade remote key. See the compatible items section for more info on these.
WARNING! KEEP BATTERIES OUT OF REACH OF CHILDREN. Never allow children to replace button batteries on any device. Swallowing or placing a button cell battery inside any part of the body may lead to severe or fatal injuries in as little as 2 hours or less due to chemical burns and potential perforation of the oesophagus.
If you suspect your child has swallowed a button battery or placed inside any part of the body, immediately call the POISONS INFORMATION CENTRE on 13 11 26 for prompt advice. If your child is having any difficulty breathing, contact 000.
Dispose of used button/coin batteries immediately and safely. A battery can still be dangerous even when it can no longer operate the device. Place sticky tape around both sides of the battery and dispose of it immediately out of reach of children in an outside bin or recycle safely.
Please see button battery safety information from the Australian Competition & Consumer Commission (ACCC).
Frequency | 433.92 MHz |
No. of Buttons | 3 BUTTONS |
Shell Colour | CHROME & BLACK |
Button Colour | BLACK |
Remote Programming Method | IN CAR PROGRAMMABLE |
Encryption Type | ROLLING CODE |
Transponder Programming Method | DIAGNOSTIC TOOLS REQUIRED |
Dimensions in mm (L x W x D) | 73 x 37 x 17 |
Battery Type | CR2032 - 3V |
LED Color | RED |
This service is to cut and program a key we are supplying to your vehicle. We do this for you at our workshop in East Victoria Park W.A. THE VEHICLE MUST BE HERE FOR US TO DO THIS SERVICE - IF YOU DO NOT LIVE IN PERTH YOU CAN PURCHASE A KEY OR REMOTE FROM US AND HAVE IT PROGRAMMED LOCALLY WHERE YOU LIVE
This Subaru 57497AG153 compatible 3 button remote key can be used with a number of Subaru vehicles as listed below. Cutting the key & coding the transponder chip, is NOT included in the price but this service is available at our East Victoria Park workshop. CAR SHOULD BE PRESENT AT TIME OF CUTTING KEY - AFTERMARKET FLIP KEYS AVAILABLE TOO. DPSB04-B - A22
This carbon transponder chip can be known as an ID62 - 4D62 DST40 - TP28 TEXAS CRYPTO. This type of transponder is used with many vehicles including Suzuki & Subaru models. TP1 - DIAG
The B29-3 is a 3 button flipkey & uses a Standard Transmitter and is compatible where the original remote or flip key uses a Standard Transmitter. If your original remote has a Crystal Transmitter you need the B-Series Crystal flip-keys. Using our in-house tools we can generate a new remote allowing you to get a flip-key for a fraction of the cost of...
Subaru compatible Silca DAT17 or JMA SUB-2 aftermarket flip key blade to suit our range of aftermarket flip keys for use with a number of Subaru vehicles as listed below. The Silca DAT17 key profile is mostly used for newer Subaru vehicles from around 2003 onward. KD1
No customer reviews for the moment.