B01-LUX-04 (DIAG)
New product
This aftermarket 3 button flip key can be used on Ssangyong Rexton models 2006 onward using the all black remote key shown in the images attached fitted with a 4D60 transponder chip.
Cutting the key & programming of the transponder chip, is NOT included in the price but can be done at our East Victoria Park workshop.
B01-LUX-04
Warning: Last items in stock!
Availability date:
This key profile can be used with the following Ssangyong models in the table below:
MODEL | YEARS |
SSANGYONG REXTON | 2006 ONWARD |
THIS TABLE IS INTENDED TO BE USED AS A GUIDE ONLY. IF YOUR KEY LOOKS IDENTICAL TO THE ONES IN THE PHOTOS THEN WE SHOULD BE ABLE TO MAKE YOU A SPARE KEY EVEN IF THE SPECIFIC MODEL DOES NOT APPEAR IN THE TABLE.
This key profile is a JMA TOYO-18 and has the same key blade as a Silca TOY40.
This is an edge cut cut key profile and we sure a special extremly accurate cutter to duplicate your key.
The remote features a LOCK - UNLOCK - BOOT buttons where the boot button operates the panic alarm.
This key can only be programmed to your vehicle using a specialist diagnostic tool connected to the vehicle. We are licensed to do this in WA.
THIS KEY IS FITTED WITH A 4D60 TYPE TRANSPONDER - THERE ARE IDENTICAL LOOKING KEYS USED WITH OTHER REXTON MODELS THAT USE AN ID48 OR ID8E TYPE TRANPONDER - THEY ARE NOT INTERCHANGABLE
As a general rul;e we have found that the following models use the corresponding transponder chips:
Please allow up to 45 minutes for this type of remote key to be cut & programmed. It is alwasy best to phone ahead and book an appointment to avoid having to wait even longer.
If your original key still works but the case is damaged, we do also sell a replacement case for these keys which you will find under Compatible Items below.
WARNING! KEEP BATTERIES OUT OF REACH OF CHILDREN. Never allow children to replace button batteries on any device. Swallowing or placing a button cell battery inside any part of the body may lead to severe or fatal injuries in as little as 2 hours or less due to chemical burns and potential perforation of the oesophagus.
If you suspect your child has swallowed a button battery or placed inside any part of the body, immediately call the POISONS INFORMATION CENTRE on 13 11 26 for prompt advice. If your child is having any difficulty breathing, contact 000.
Dispose of used button/coin batteries immediately and safely. A battery can still be dangerous even when it can no longer operate the device. Place sticky tape around both sides of the battery and dispose of it immediately out of reach of children in an outside bin or recycle safely.
Please see button battery safety information from the Australian Competition & Consumer Commission (ACCC).
Frequency | 433.92 MHz |
No. of Buttons | 3 BUTTONS |
Shell Colour | BLACK |
Button Colour | BLACK |
Remote Programming Method | DIAGNOSTIC TOOLS REQUIRED |
Transponder Programming Method | DIAGNOSTIC TOOLS REQUIRED |
Dimensions in mm (L x W x D) | 66 x 38 x 18 |
Battery Type | CR2032 - 3V |
LED Color | RED |
CR2032 is a 3 Volt battery and measures 20 mm x 20 mm x 3.2 mm Remote controls for garage doors, swing & sliding gates, home security systems, car alarms, central locking systems use lithium batteries. It is vital to select the correct battery both for fit and function of the device. One of, if not the most reliable lithium battery on the market is...
This service is to cut and program a key we are supplying to your vehicle. We do this for you at our workshop in East Victoria Park W.A. THE VEHICLE MUST BE HERE FOR US TO DO THIS SERVICE - IF YOU DO NOT LIVE IN PERTH YOU CAN PURCHASE A KEY OR REMOTE FROM US AND HAVE IT PROGRAMMED LOCALLY WHERE YOU LIVE
This carbon transponder chip can be known as an ID60 - 4D60 - TP19 or ID 6F-60 (when configured for Ford). It is mostly referred to as a 4D60 and can be used in a large number of different makes of car. TP1 - DIAG
The B01 Lux 3 button flip key uses a Crystal Transmitter and so is compatible where the original remote or flip key also uses a Crystal Transmitter. BOOT button will only work if original factory remote had a BOOT button. Using our in-house tools we can precode the circuit board in this key to match remotes from 1000s of different vehicles.
Hyundai, kKia, Mitsubishi, Toyota, Lexus & Ssangyong compatible Silca TOY40 or JMA TOYO-18 aftermarket flip key blade to suit our range of aftermarket flip keys for use with a long list of vehicles as listed below. PLEASE CHECK THE PHOTOS CARERFULLY AS THIS KEY BLADE IS SIMILAR TO A NUMBER OF OTHERS KD2
No customer reviews for the moment.