RECEIVER KIT 2 (G57 - P71)
New product
When a suitable remote is no longer available for older garage motors the only option is to add a receiver to the motor that works with newer remotes that are available. This kit includes 1 receiver and 2 remotes for that situation.
The remotes are 433.92mhz rolling code remote controls.
G57 - P71
Warning: Last items in stock!
Availability date:
This compact 2 channel receiver can operate 2 garage motors within the same garage if you have side by side or front and rear doors. It has capacity for over 30 remote controls which should be plenty for the majority of situations.
The receiver can take the 12V - 24V power it needs from many garage motors but in some cases an external power source will be needed. If you let us know what model motor you have we can advise further on that.
You can purchase some 4 core cable to use from the compatible items tab on this page also.
Wiring diagrams can be supplied for most motors and connection only involves 2 wires for each channel. Some example data is shown in the table below:
GARAGE MOTOR | EXTERNAL POWER NEEDED | NOTES |
MERLIN 2500L | YES - NEEDS POWER ADAPTER | SPLICE 2 WIRES INTO WALL SWITCH WIRES ON MOTOR |
DOMINATOR | NO - CAN GET POWER FROM MOTOR | USE 4 CORE WIRE TO CONNECT POWER AND CHANNEL |
ATA | NO - CAN GET POWER FROM MOTOR | USE 4 CORE WIRE TO CONNECT POWER AND CHANNEL |
B&D MPC1 & 3 | YES - NEEDS POWER ADAPTER | SPECIAL WIRING HARNESS NEEDED |
When sold separately this kit cost a total of $123.85 so you save $23.90 buying it as a kit.
12 Month Warranty on receivers in line with the manufacturer conditions, so you can buy your new receiver with full peace of mind and confidence that should there be a problem you are covered.
If you have any issues during programming please call us and we will talk you through it.
We can also come and program your new remote anywhere across the Perth metro area just select Deliver and Program as your preferred delivery method at Checkout.
Frequency | 433.92 MHz |
No. of Buttons | 4 BUTTONS |
Shell Colour | CHROME & BLACK |
Button Colour | BLACK |
Remote Programming Method | LEARN TO RECEIVER |
Encryption Type | ROLLING CODE |
This aftermarket 2 channel receiver is compact and is compatible with a long list of 433.92mhz rolling code remote controls. See the table below for just some of the compatible remotes. Can store up to 100 remote controls. G57 - P71
Hiland T6522 4 button rolling code remote can be used to replace any of the other Hiland rolling code remote. Used extensively with stand alone add on receivers for garage doors and electric gates. G50 - P69
This 4 core security cable is ideal for use with 12 volt - 24 volt receiver units. We sell the cable as a minimum 30 cm cut length and going up in 30 cm increments from there. Both ends are pre-stripped for easy connection.
No customer reviews for the moment.