ATA FHRX-2V2 TrioCode 128 bit 2 channel 433 MHz receiver 14815

This ATA stand alone receiver can work with either ATA 128 Bit Trio-Code remotes or B&D 128 Bit Trio-Code remotes but not at the same time. The receiver can only be set up to use one or the other type. This is dicated by the first remote coded to the receiver.

It is compatible with the following remotes:

It can operate between 9 V to 24 V.

This receiver comes with a pre-wired harness to allow it to be plugged into many ATA & B&D motors for very simple plug and play setup. These include GDO-2, GDO-4, GDO-6, GDO-9, GDP-11, Neoslider and others. See examples in the photos attached.

An installation manual is included in the packaging. The 2 connectors on the harness plug into the P/E and O/S/C sockets on the back of most ATA motors. If you are not sure just let us know what motor you have and we will confirm if this item is correct for you.

If you are not certain that the remotes you have are compatible please feel free to email us a photo of the remotes and your motors and we will be more than happy to help you work out what options you have and what the simplest solution will be.

We offer a 12 Month Warranty on receivers in line with the manufacturer conditions, so you can buy your new receiver with full peace of mind and confidence that should there be a problem you are covered.

If you have any issues during programming please call us and we will try to talk you through it. We can also come and program your new remote anywhere across the Perth metro area just select Deliver and Program as your preferred delivery method at Checkout.