Mongoose M80 Series N4096 Z333 2 button car alarm remote control

This genuine Mongoose M80 series N4096 Z333 2 button car alarm remote works with all pre-2009 M80 series and Mx750 series car alarm, central locking or immobiliser systems from Mongoose using 2 button remote controls.

The remote operates on 433.92 MHz and has a green LED.

The circuit board of this remote should have a model number RTCA-1 printed on it.

If you do not have a working remote you will need to find your over-ride code from the owners manual.

To code in a new remotes to M80 model car alarms:

1. Disarm by existing remote, or use the override
2. Open the drivers door and leave open, LED starts Flashing
3. With-in 10 Seconds, Turn the ignition ON - the LED will now light Solid for 10 Seconds
4. With-in 10 Seconds, turn ignition OFF then back ON
5. The LED stays on &the Siren chirps 3 times to confirm remote code learning mode
6. Press arm button on first remote (siren chirps once to confirm)
7. Press arm button on second remote (siren chirpstwice to confirm)
8. Repeat for any other remotes
9. To finish, turn the ignition off or Wait 10 seconds for learning process to complete, siren chirps quickly 3 times

To learn MRC80 to MX750

1. Disarm by existing remote, or use the override
2. Ignition ON and press override button 4 times and hold down on 4th press (siren chirps after 3rd press)
3. Press arm button on first remote (siren chirps)
4. Press arm button on second remote (siren chirps)
5. Repeat for any other remotes
6. Release the override button and turn ignition OFF
7. NOTE: existing remotes must be re-learnt at the same time