SEA Coccinella Copy - 4 button red and black gate remote FCC ID 2AEEA-2311CC4

This Sea Coccinella Copy remote can be used to copy the fixed code from other Coccinella Copy remotes

The instructions that come with the remote explain how to copy the code from your working remote to the new one.

CHECK STICKER ON THE BACK OF YOUR OLD REMOTE TO CONFIRM THAT IT IS A COCCINELLA COPY.

NOT COMPATIBLE - WITH ROLL - ROLL PLUS OR UNI REMOTES

The remote measures just 42 MM X 71 MM X 14 MM. It uses 1 x 23AE 12 Volt battery.

The sticker on the back of the remote shows the FCC ID: 2AEEA-2311CC4

Copying a Code to your new remote:

1. On the NEW remote - press and hold down buttons 1 & 2 on the remote until the LED starts to flash radidly

2. Once the LED starts to flash rapidly release both buttons.

3. Within 8 seconds press the button on the NEW remote where you wish to store the code you are about to copy. The LED will now stop flashing and just stay on solid

4. Take your old working remote and hold down the button you wish to copy. As you do this place both remotes back to back or side by side as shown in the included instructions.

5. Once the code has been stored the LED in the new remote will flash twice to confirm.

6. If you use other buttons on your old remote for other functions, repeat the steps above to copy those codes to the new remote. 

If you are not certain that the remote you have is compatible please feel free to email us a photo of the remote sticker on the back  we will be more than happy to help you work out which remote to purchase.

We offer a 12 Month Warranty on all genuine remotes in line with the manufacturer conditions, so you can buy your new remote with full peace of mind and confidence that should there be a problem you are covered.

If you have any issues during programming please call us and we will talk you through it. We can also come and program your new remote anywhere across the Perth metro area just select Deliver and Program as your preferred delivery method at Checkout.