Mitsubishi non-genuine remote - G on the back for Lancer Challenger Triton ASX & more

This new aftermarket Mitsubishi remote works with various Mitsubishi models using the G8D-576-MA “G” on the back of the remote shell including the following vehicles:

The information in this table is intended as a guide only and you must confirm the details on the back of your old remote match those listed above to be sure this is the right product for you.

SOME OF THE MODELS LISTED ABOVE WERE RELEASED WITH DIFFERENT KEYS FOR THIS YEAR - PLEASE ENSURE YOUR KEY HAS THE G OR Q ON THE BACK OF THE REMOTE MODULE AS SHOWN IN THE PHOTOS.

See the photos for more information on this and where to find the G marked on your original remote.

This remote can only be programmed to the vehicle using a diagnostic tool by a licensed repairer. We can do this for you or you can use a local locksmith, mechanic or auto electrician where you live.

There are 2 main key profiles used on Mitsubishi vehicles and so it is vital you look closely at the grooves on the blade of your key to identify which key shell you need.

These remotes are supplied with a CR1616 battery already fitted and if you need a spare or extra battery you can find these under compatible items.

You can can always send us a photo of your key and remote if you are unsure of what you need.

WARNING! KEEP BATTERIES OUT OF REACH OF CHILDREN. Never allow children to replace button batteries on any device. Swallowing or placing a button cell battery inside any part of the body may lead to severe or fatal injuries in as little as 2 hours or less due to chemical burns and potential perforation of the oesophagus.

If you suspect your child has swallowed a button battery or placed inside any part of the body, immediately call the POISONS INFORMATION CENTRE on 13 11 26 for prompt advice. If your child is having any difficulty breathing, contact 000.

Dispose of used button/coin batteries immediately and safely. A battery can still be dangerous even when it can no longer operate the device. Place sticky tape around both sides of the battery and dispose of it immediately out of reach of children in an outside bin or recycle safely.

Please see button battery safety information from the Australian Competition & Consumer Commission (ACCC).