CC33-67-5RYC (A12 - P4C)
New product
This genuine 2 button Mazda flip key remote part CC-67-5RYC can be used with a number of models including the Mazda CX9 models from 2007 - 2014
Your key should have Mitsubishi Electric Corporation SKE126-01 on the inner edge of the remote where it joins to the key part.
FLIP KEY PART - SOLD SEPERATELY
A12 - P4C
Warning: Last items in stock!
Availability date:
This 2 button flip key remote part CC33-67-5RYC can be used with a number of Mazda models including:
MODEL | YEARS |
MAZDA 2 DE SERIES 1 & 2 | 06/2007 - 2014 |
MAZDA CX-7 | 09/2006 - 204 |
MAZDA CX-9 CLASSIC & SPORT | 10/2007 - 2014 |
MAZDA CX-9 GT SPEC | 10/2007 - 2012 |
MAZDA 3 BL HATCH | 04/2009 - 2014 |
This is the remote part of the flip key only and can be programmed to your vehicle using an on-board procedure. Instructions for this on-board procedure will be included with each purchase. It is pretty simple to do and you just need a working key that can start the car to do it.
There are many versions of this style Mazda remote which all look the same on the outside but have different circuits. This one here has the part number detail printed on the area where the remote joins the flip key part.
YOU MUST CHECK YOUR KEY TO ENSURE THE PART NUMBER IS THE SAME
YOU CAN ALSO CHECK THE SKE - CAN BE EITHER SKE126-01 OR SKE126-A1
The key part for this remote is also available to order separately- see the Compatible Items section down the page.
If your remote has stopped working and you have had the battery replaced but the key still starts the car, you can simply replace the remote part.
The remote is supplied with a working battery and the type of battery is listed under Compatible items, if you need a spare one for your old remote.
Cheaper aftermarket options are also shown below under compatible items.
WARNING! KEEP BATTERIES OUT OF REACH OF CHILDREN. Never allow children to replace button batteries on any device. Swallowing or placing a button cell battery inside any part of the body may lead to severe or fatal injuries in as little as 2 hours or less due to chemical burns and potential perforation of the oesophagus.
If you suspect your child has swallowed a button battery or placed inside any part of the body, immediately call the POISONS INFORMATION CENTRE on 13 11 26 for prompt advice. If your child is having any difficulty breathing, contact 000.
Dispose of used button/coin batteries immediately and safely. A battery can still be dangerous even when it can no longer operate the device. Place sticky tape around both sides of the battery and dispose of it immediately out of reach of children in an outside bin or recycle safely.
Please see button battery safety information from the Australian Competition & Consumer Commission (ACCC).
RK REF: DPMZ18-27076
Frequency | 434 MHz |
No. of Buttons | 2 BUTTONS |
Shell Colour | BLACK |
Button Colour | BLACK |
Remote Programming Method | IN CAR PROGRAMMABLE |
Encryption Type | ROLLING CODE |
Dimensions in mm (L x W x D) | 45 x 33 x 16 |
Battery Type | CR1620 - 3V |
LED Color | RED |
CR1620 is a 3 Volt battery and measures 16 mm x 16 mm x 2.0 mm Remote controls for garage doors, swing & sliding gates, home security systems, car alarms, central locking systems use lithium batteries. It is vital to select the correct battery both for fit and function of the device. One of, if not the most reliable lithium battery on the market is...
This genuine Mazda flip key part can be used with a number of models. The flip key head contains a blank 4D63 + dst40 transponder chip that will need to be coded to your vehicle using diagnostic equipment - not included in price. A12 - DIAG
This non-genuine Mazda flip key part can be used with a number of models. The flip key head contains a blank 4D63 + dst40 transponder chip that will need to be coded to your vehicle using diagnostic equipment - not included in price. A12 - DIAG
No customer reviews for the moment.