Mongoose MRC60 old N4096 Z333 2 button car alarm remote control MRC60

This older 2 grey button Mongoose MRC60 2 button car alarm remote worked with a number of different M60 series car alarm, central locking or immobiliser systems made before 2009 It operates on 434 MHz and has a RED LED.

THIS REMOTE CAN BE REPLACED BY THE REMOTE YOU WILL SEE ON THE COMPATIBLE ITEMS TAB

Later model M60 systems made from mid 2009 to 2011 were supplied with very different looking 3 button chrome & black remote control with a BLUE LED which operates on 303.9 MHz. M60 systems made after 2011 were also a chrome & black 3 button remote with a green LED. 

The circuit board of this remote should have the following numbers printed on it - HPD52-1. The remote has no model number on the case and there are other very similar looking remotes on the market that are not the same so it is vital you check what system is fitted to your vehicle before purchasing this remote.

There was also another version of this remote as shown in the photos attached.

The back cover of the remote just has the N4096 Z333 compliance number on it.

If you do not have a working remote you will need to find your over-ride code from the owners manual.

Below you will see the coding instructions for the the M60 systems that this remote can be used with.

To learn new remotes to M60 models:

1. Disarm by existing remote, or use the override
2. Open the drivers door and leave open
3. Turn the ignition ON/OFF 3 times - siren chirps
4. Press arm button on first remote (siren chirps)
5. Press arm button on second remote (siren chirps)
6. Repeat for any other remotes
7. Wait 10 seconds for learning process to complete