285E3-4CB0C (A2 - DIAG)
New product
This genuine Nissan 2 button smart proximity key can be used with a number of models as listed below including Nissan Qashqai J11 2013 onward and other models as shown below.
Genuine part number: 285E3-4CB0C
Smart key needs to be coded diagnostically - coding is not included in price
A2 - DIAG
This product is no longer in stock. Please select from the Compatible Items below
Warning: Last items in stock!
Availability date:
This 2 button genuine Nissan smart remote key or proximity key can be used with the models below. You will notice as a genuine item this key has the Nissan logo.
The key and remote can only be coded to the vehicle using specialist diagnostic equipment and this can be done in our store or by your local automotive locksmith, some mechanics or auto electricians.
This key can be used with the following vehicles:
VEHICLE | YEAR FROM | YEAR TO |
NISSAN PULSAR B17 | 2013 | 2017 |
NISSAN QASHQAI J11 1ST GEN | 2013 | 2017 |
NISSAN QASHQAI J11 2ND GEN | 2017 | ONWARD |
NISSAN X-TRAIL T32 3RD GEN | 2013 | 2017 |
The vehicle information shown in the table above is intended to be used as a guide only.
You need to check that the key you have looks identical to this one in the photos and that the part details shown in the emergency key slot matches:
Continental S180144102 433.92 MHz
CMIIT ID: 2012DJ6167
TRC/LPD/2011/78
KCC-CRM-TAL-S180144202
MR6418 ANRT2011
TA-2012/1102
If the details on your key do not match you can alwasy pop into our store so we can read your existing key to confirm compatibility. Alternatively you can send us a photo of the VIN plate from your vehicle and the key details found behind the emergency key.
You can remove the emergency key by pushing the release across on the back of the key and sliding out the emergency key. You will find the FCC ID etc behind this. You can see an example of this in the photos attached.
EMERGENCY KEY SOLD SEPARATELY - SEE COMPATIBLE ITEMS
We also stock an aftermarket version of this smart prox key and you can find it under the Compatible Items tab.
CHIP: 4A PCF7945M HITAG AES
REMOTE: 433 MHz FSK
Emergency Key: NSN14
WARNING! KEEP BATTERIES OUT OF REACH OF CHILDREN. Never allow children to replace button batteries on any device. Swallowing or placing a button cell battery inside any part of the body may lead to severe or fatal injuries in as little as 2 hours or less due to chemical burns and potential perforation of the oesophagus.
If you suspect your child has swallowed a button battery or placed inside any part of the body, immediately call the POISONS INFORMATION CENTRE on 13 11 26 for prompt advice. If your child is having any difficulty breathing, contact 000.
Dispose of used button/coin batteries immediately and safely. A battery can still be dangerous even when it can no longer operate the device. Place sticky tape around both sides of the battery and dispose of it immediately out of reach of children in an outside bin or recycle safely.
Please see button battery safety information from the Australian Competition & Consumer Commission (ACCC).
GEN REF: 285E3-4CB0C
MK REF: MK15242-08752
Frequency | 433.92 MHz |
No. of Buttons | 2 BUTTONS |
Shell Colour | GREY |
Button Colour | CHROME |
Remote Programming Method | DIAGNOSTIC TOOLS REQUIRED |
Transponder Programming Method | DIAGNOSTIC TOOLS REQUIRED |
Dimensions in mm (L x W x D) | 73 x 34 x 14 |
Battery Type | CR2032 - 3V |
LED Color | NO LED |
This aftermarket Nissan compatible 2 button smart key can be used with a number of models as listed below including Pulsar B17, Qashqai J11 & X-Trail T32. Replaces genuine part: 285E3-4CB0C Smart key needs to be coded diagnostically - coding is not included in price A2 - DIAG
This service is to cut and program a key we are supplying to your vehicle. We do this for you at our workshop in East Victoria Park W.A. THE VEHICLE MUST BE HERE FOR US TO DO THIS SERVICE - IF YOU DO NOT LIVE IN PERTH YOU CAN PURCHASE A KEY OR REMOTE FROM US AND HAVE IT PROGRAMMED LOCALLY WHERE YOU LIVE
This emergency key blade is suitable for use with a number of Nissan Smart keys or proximity keys. The key blade is a Silca NSN14 or JMA DAT 15 profile and is very commonly used. The key blade will need to be cut to match your vehicle. A2
This genuine Nissan 2 button smart proximity key can be used with a number of models as listed below including Nissan X-Trail T32 2013 to 2022 and other models as shown below. Genuine part number: 285E3-4CB0C Smart key needs to be coded diagnostically - coding is not included in price A2 - DIAG
No customer reviews for the moment.