Toyota Landcruiser & Kluger 2 button proximity key - 89904-60450 with 271451-3370 PCB

89904-60450 (A10- DIAG)

New product

Genuine Toyota 89904-60450 smart proximity key to suit Toyota Landcruiser 200 & some Kluger models where the original circuit board has the number 271451-3370 with the same button layout.

This one has a 4D+ DST80 P1 98 transponder chip and 314.3 MHz ASK remote type.

REMOTE ONLY - KEY CUTTING & CODING IS EXTRA

A10 - DIAG

More details

$465.00 GST incl.

Shipping Rates

Genuine Toyota smart proximity key 89904-60450 is compatible with Toyota models including:

TOYOTA MODELS YEAR FROM YEAR TO
LANDCRUISER 200 SERIES 2008 2016
KLUGER GRANDE 2010 2014

This vehicle list is intended as a guide only and the most definitive method to identify your current key is open the case and check the circuit board number printed on the front of the PCB next to the top button.

For this key it should be 271451-3370 and only have LOCK & UNLOCK buttons.

If you bring your key into our shop we can also scan the transponder chip and check the remote frequency to confirm it matches 

If you are not sure you can send us a photo of the front and back of the circuit board inside your current smart key and we will assist you to identify the correct replacement.

Genuine Toyota smart keys are not supplied with the emergency key blade included. If you need an emergency key blade you can find them under compatible items.

This type of smart key is also sometimes referred to as a proximity key or prox key as it allows you to start the vehicle without having to put it in a slot or put a key in the ignition.

This type of smart key can only be coded to your vehicle using specialist diagnostic tools by a licensed locksmith or vehicle repairer. We can code the smart key and cut your key in our work shop in on Bank Street in East Victoria Park WA or you can have it done locally to where you live.

Coding a spare or extra key to this type of Toyota vehicle is pretty straight foward but if you lose your only key the process becomes more complicated and far more expensive so we strongly advise you to always make sure you have a spare key for your Toyota.

We charge $90 to code this type of smart key when supplied by us. You will need to call to make an appointment for this service.

WARNING! KEEP BATTERIES OUT OF REACH OF CHILDREN. Never allow children to replace button batteries on any device. Swallowing or placing a button cell battery inside any part of the body may lead to severe or fatal injuries in as little as 2 hours or less due to chemical burns and potential perforation of the oesophagus.

If you suspect your child has swallowed a button battery or placed inside any part of the body, immediately call the POISONS INFORMATION CENTRE on 13 11 26 for prompt advice. If your child is having any difficulty breathing, contact 000.

Dispose of used button/coin batteries immediately and safely. A battery can still be dangerous even when it can no longer operate the device. Place sticky tape around both sides of the battery and dispose of it immediately out of reach of children in an outside bin or recycle safely.

Please see button battery safety information from the Australian Competition & Consumer Commission (ACCC).

GEN REF: 89904-60450

MK REF: MK6085 23005

Frequency 314mhz
No. of Buttons 2 BUTTONS
Shell Colour SILVER
Button Colour SILVER
Remote Programming Method DIAGNOSTIC TOOLS REQUIRED
Transponder Programming Method DIAGNOSTIC TOOLS REQUIRED
Dimensions in mm (L x W x D) 61 x 38 x 14
Battery Type CR1632 - 3V
LED Color RED
  • $8.95 In Stock

    CR1632 is a 3 Volt battery and measures 16 mm x 16 mm x 3.2 mm Remote controls for garage doors, swing & sliding gates, home security systems, car alarms, central locking systems use lithium batteries. It is vital to select the correct battery both for fit and function of the device. One of, if not the most reliable lithium battery on the market is...

    $8.95
    In Stock
  • $11.95 In Stock

    This emergency key blade can be used with a large number of Toyota Smart keys. It is double sided and is on the Silca TOY48 or JMA TOY30 profile as you will see in the photos A26

    $11.95
    In Stock
  • $90.00 In Stock

    This service is to cut and program a key we are supplying to your vehicle. We do this for you at our workshop in East Victoria Park W.A. THE VEHICLE MUST BE HERE FOR US TO DO THIS SERVICE - IF YOU DO NOT LIVE IN PERTH YOU CAN PURCHASE A KEY OR REMOTE FROM US AND HAVE IT PROGRAMMED LOCALLY WHERE YOU LIVE

    $90.00
    In Stock
  • $19.95 In Stock

    This aftermarket smart key case can be used to replace your damaged Toyota Landcruiser Prado smart key outer casing. Front and back of shell plus rubber pad included in kit. REMOTE SHELL ONLY - NO ELECTRONICS INCLUDED S83

    $19.95
    In Stock

No customer reviews for the moment.

Write a review

Toyota Landcruiser & Kluger 2 button proximity key - 89904-60450 with 271451-3370 PCB

Toyota Landcruiser & Kluger 2 button proximity key - 89904-60450 with 271451-3370 PCB

Genuine Toyota 89904-60450 smart proximity key to suit Toyota Landcruiser 200 & some Kluger models where the original circuit board has the number 271451-3370 with the same button layout.

This one has a 4D+ DST80 P1 98 transponder chip and 314.3 MHz ASK remote type.

REMOTE ONLY - KEY CUTTING & CODING IS EXTRA

A10 - DIAG

Compatible Items

Follow us on Facebook

Brands