Toyota Prado 2009 - 2016 2 button genuine smart key 89904-60561

Genuine 89904-60561 Toyota OEM smart key remote is compatible with a number of Toyota Landcruiser Prado models including:

This vehicle list is intended as a guide only and the most definitive method to identify your current key if it is genuine, is to open it up and check the circuit board number.

The circuit board number should be 271451-5290

There are some other details on the back of this genuine key as you will see from the photos and these include:

FCC ID: HYQ14ACX

CCAB08LP0730T4

DENSO 14ACX

However the details above may also appear on toher remote keys with different button confidurations and so it is best to confirm the circuit board ID and number of buttons on your current key match this one.

If your current key is an aftermarket key then the only method is by reading the frequency of the remote and scanning the transponder chip in store. If you are not sure you can send us a photo of the front and back of the circuit board in your current smart key and we will assist you to identify the correct replacement. You can also send us your VIN number so we can cross reference it.

P1-98 DST80 TRANSPONDER

314.4 MHx FSK REMOTE

This type of smart key is also sometimes referred to as a proximity key or prox key as it allows you to start the vehicle without having to put it in a slot or put a key in the ignition.

There is a battery included in the price and if you require a spare you can find them under Compatible Items below.

All genuine Toyota proximity keys are supplied without an emergency key blade. You can add one to your cart from the Compatible Items section below.

If your current key features the red panic button, this is not a problem. As long as the chip and remote type match this smart key can be coded to your vehicle.

This type of smart key can only be coded to your vehicle using specialist diagnostic tools by a licensed locksmith or vehicle repairer. We can code the smart key and cut your key in our workshop in East Victoria Park WA or you can have it done locally to where you live.

We charge $90 to code this type of smart keyand cut the key blade. You will need to call to make an appointment.

WARNING! KEEP BATTERIES OUT OF REACH OF CHILDREN. Never allow children to replace button batteries on any device. Swallowing or placing a button cell battery inside any part of the body may lead to severe or fatal injuries in as little as 2 hours or less due to chemical burns and potential perforation of the oesophagus.

If you suspect your child has swallowed a button battery or placed inside any part of the body, immediately call the POISONS INFORMATION CENTRE on 13 11 26 for prompt advice. If your child is having any difficulty breathing, contact 000.

Dispose of used button/coin batteries immediately and safely. A battery can still be dangerous even when it can no longer operate the device. Place sticky tape around both sides of the battery and dispose of it immediately out of reach of children in an outside bin or recycle safely.

Please see button battery safety information from the Australian Competition & Consumer Commission (ACCC).

GEN REF: 89904-60561

MK REF: MK5067-19533