89904-60771 (A10 - DIAG)
New product
Genuine 89904-60771 Toyota smart proximity key to suit Toyota Landcruiser models where the original circuit board has the number 271451-6601 with the same button layout.
This one has a 4D+ DST80 P1 98 transponder chip and 314.3 MHz ASK remote type.
REMOTE ONLY - KEY CUTTING & CODING IS EXTRA
A10 - DIAG
Warning: Last items in stock!
Availability date:
Genuine Toyota smart proximity key 89904-60771 is compatible with Toyota models including:
TOYOTA MODELS | YEAR FROM | YEAR TO |
LANDCRUISER | 2009 | 2015 |
This vehicle list is intended as a guide only and the most definitive method to identify your current key is open the case and check the circuit board number printed on the front of the PCB next to the top button.
For this key it should be 271451-6601 and only have LOCK - UNLOCK _ PANIC buttons.
If you bring your key into our shop we can also scan the transponder chip and check the remote frequency to confirm it matches this one.
The back of your remote case may have this detail also:
FCC ID: HYQ14AEM
IS: 1551A-14AEM
COFETEL RCPDE1409-1162
47190/SDPPI/2016
2361
DENSO 14AEM
Even if the back of your remote case has the above detail it is still advisable to confirm the circuit board id as this is the deinitive identifyer as the case may have been replaced at some point.
If you are not sure you can send us a photo of the front and back of the circuit board inside your current smart key and we will assist you to identify the correct replacement.
IMPORTANT: 271451-6601 remote circuit board can be used in either 2 button, 3 button or 4 button configuration depending on the vehicle it is being used with and the BOOT or TAILGATE function can vary accordingly.
Genuine Toyota smart keys are not supplied with the emergency key blade included. If you need an emergency key blade you can find them under compatible items.
This type of smart key is also sometimes referred to as a proximity key or prox key as it allows you to start the vehicle without having to put it in a slot or put a key in the ignition.
This type of smart key can only be coded to your vehicle using specialist diagnostic tools by a licensed locksmith or vehicle repairer. We can code the smart key and cut your key in our work shop in on Bank Street in East Victoria Park WA or you can have it done locally to where you live.
Coding a spare or extra key to this type of Toyota vehicle ir pretty straight foward but if you lose your only key the process becomes more complicated and far more expensive so we strongly advise you to always make sure you have a spare key for your Toyota.
We charge $90 to code this type of smart key when supplied by us. You will need to call to make an appointment for this service.
WARNING! KEEP BATTERIES OUT OF REACH OF CHILDREN. Never allow children to replace button batteries on any device. Swallowing or placing a button cell battery inside any part of the body may lead to severe or fatal injuries in as little as 2 hours or less due to chemical burns and potential perforation of the oesophagus.
If you suspect your child has swallowed a button battery or placed inside any part of the body, immediately call the POISONS INFORMATION CENTRE on 13 11 26 for prompt advice. If your child is having any difficulty breathing, contact 000.
Dispose of used button/coin batteries immediately and safely. A battery can still be dangerous even when it can no longer operate the device. Place sticky tape around both sides of the battery and dispose of it immediately out of reach of children in an outside bin or recycle safely.
Please see button battery safety information from the Australian Competition & Consumer Commission (ACCC).
GEN REF: 89904-60771
MK REF: MK5057-22427
Frequency | 314mhz |
No. of Buttons | 2 BUTTONS + PANIC BUTTON |
Shell Colour | SILVER |
Button Colour | 3 X SILVER 1 X RED |
Remote Programming Method | DIAGNOSTIC TOOLS REQUIRED |
Transponder Programming Method | DIAGNOSTIC TOOLS REQUIRED |
Dimensions in mm (L x W x D) | 61 X 38 X 16 |
Battery Type | CR1632 - 3V |
LED Color | RED |
CR1632 is a 3 Volt battery and measures 16 mm x 16 mm x 3.2 mm Remote controls for garage doors, swing & sliding gates, home security systems, car alarms, central locking systems use lithium batteries. It is vital to select the correct battery both for fit and function of the device. One of, if not the most reliable lithium battery on the market is...
This emergency key blade can be used with a large number of Toyota Smart keys. It is double sided and is on the Silca TOY48 or JMA TOY30 profile as you will see in the photos A26
This service is to cut and program a key we are supplying to your vehicle. We do this for you at our workshop in East Victoria Park W.A. THE VEHICLE MUST BE HERE FOR US TO DO THIS SERVICE - IF YOU DO NOT LIVE IN PERTH YOU CAN PURCHASE A KEY OR REMOTE FROM US AND HAVE IT PROGRAMMED LOCALLY WHERE YOU LIVE
No customer reviews for the moment.