Airkey AK2 - N Serial number 2 button remote control

This is the latest version of the older Airkey AKTX2 and while it looks different it will work the same as long as your remote serial number starts with #N. 

The Airkey system is a very widely used gate & garage door system especially for apartment and multi-dwelling complexes. It features a very secure rolling code system to maximize security.

There are a few different versions of this remote and so it is vital to check the questions below before purchasing.

1. Does your remote serial number on the back start with #:N? If yes then this remote is compatible with your receiver.

2. Does the model of your remote appear in the compatible remotes photo attached? If not but the serial number on your remote starts with a #:N, then email us a photo of the back and front of your remote and we will assist you to find the correct remote. 

3. Does your remote model number end with W26 (e.g. AKTX4W26) - if yes then your remote has a W26 RFID tag inside it to use with an RFID scanner for a door or lift and so this remote here does not have that function. If your remote has the W26 you will most likely have to have it programmed via the STRATA manager for your building complex as they will control access to the control panel needed for programming the RFID tags.

There are 2 methods of programming these remotes to garage and gate motors.

METHOD 1:

In the first method where the remote learning socket is still in place on the receiver board, you do not need access to the receiver, you simply need a working remote that already controls the gate or garage door in question. You can then use this working remote to place the receiver into programming mode following the instructions we will send you and add your new remote. It is a very quick and easy process. This is most commonly used on gate receivers to avoid the need to open the control box and expose the electrics to the weather.

METHOD 2:

In the second method where the remote learning socket has been removed from the receiver board then you will need access to the receiver to press the ADD button on it to add a new remote. The receiver board may be placed inside the cover of your gate motor, to the top or side of your garage motor. Sometimes when your gate has a pedestrian access gate the receiver will need to work in tandem with this and so it will be placed in a control box behind the pedestrian access keypad. The options are different in every installation.Once the receiver has been located it is then very simple to add a new remote.

If you live in a shared complex it is best to get the remote programmed by a professional to avoid deleting other users by mistake.

It is vitally import to remember that if you need to open the gate control panel it may be best to get a licensed electrician as there will be a 240 Volt power supply to the control panel and so this can be a very dangerous item if you do not know what you are doing. Great care should be taken at all times when dealing with electricity. If in doubt get a licensed professional to do the job. 

Reid's Remotes offer a call out programming service across the entire Perth metropolitan area, which can be added to your order during the checkout process.

Take a look at the photos to see which other remotes are compatible with this one.

If you are not certain that the remote you have is compatible please feel free to email us a photo of the remote and your motor and we will be more than happy to help you work out which remote to purchase.

All our remotes are supplied with easy to follow instructions on how to program them to your garage or gate motor. 

We offer a 12 Month Warranty on all genuine remotes in line with the manufacturer conditions, so you can buy your new remote with full peace of mind and confidence that should there be a problem you are covered.

If you have any issues during programming please call us and we will talk you through it. 

This product meets AS/NZS 62368.1 Clause 4.8 Safety Standards 2020 for products containing button/coin batteries.

WARNING! KEEP BATTERIES OUT OF REACH OF CHILDREN. Never allow children to replace button batteries on any device. Swallowing or placing a button cell battery inside any part of the body may lead to severe or fatal injuries in as little as 2 hours or less due to chemical burns and potential perforation of the oesophagus.

If you suspect your child has swallowed a button battery or placed inside any part of the body, immediately call the POISONS INFORMATION CENTRE on 13 11 26 for prompt advice. If your child is having any difficulty breathing, contact 000.

Dispose of used button/coin batteries immediately and safely. A battery can still be dangerous even when it can no longer operate the device. Place sticky tape around both sides of the battery and dispose of it immediately out of reach of children in an outside bin or recycle safely.

Please see button battery safety information from the Australian Competition & Consumer Commission (ACCC).

SED REF: AK2-3662