PAX-II 1000 BELT sectional garage door compatible remote control

This OEM remote control is suited to sectional or panel garage door motors as shown in the photos with a label showing the model as PAX-II. The numbers following the PAX-II will indicate the lift stregth of the motor and could be 800 or 1000

These motors have been used by a large number of garage door companies around Australia including Gryphon Garage Doors. The majority of the motors have no brand name on them and only feature a small sticker on the side up near the ceiling as shown in the photos. You must check this carefully to ensure your motor is the same model as there are many very similar looking motors produced like this.

There are many other remote controls which also ook similar to this new style remote, but will not work with your garage door motor unless it has the PAX-II or PAX-2E sticker.

YOU MUST CHECK THAT THE CIRCUIT BOARD INSIDE YOUR REMOTE M,ATCHES THE ONE IN OUR PHOTOS - IF IT DOES NOT THEN PLEASE SEND US A PHOTO OF THE FRONT AND BACK OF THE REMOTE AND THE CIRCUIT BOARD.

WILL NOT WORK WITH SUPERLIFT BRANDED MOTORS

The PAX-II motors can take a maximum of 20 remotes in the memory. If you have lost some remote controls over the years and try to add more new ones, but reach the maximum the display will show "Fu" and you will need to clear the memory and then re-code all the existing remote controls.

The control panel on the PAX-II motor has 4 buttons which read UP - DOWN - CODE & SET. There are similar looking motors which have K1, K2, K3 & K4 on the buttons and this remote will NOT work with those motors. 

The remote is provided with easy to follow istructions to code it to your garage door.

If you are not certain that this remote is correct for your motor, feel free to email us some photos of the remote you have now and the motor it is used with. We will assist from there to identify the right remote for you.