B11-2-05 (DIAG)
New product
This aftermarket 2 button flip key can be used to replace the 2 button black plastic original Calsonic Kansai Corp TS002 remote keys used on Suzuki Swift models from 2005 - 2010 as long as the part number shown in the photos and the key blade type matches.
PRICE DOES NOT INCLUDE CUTTING THE KEY & PROGRAMMING TO THE CAR
Warning: Last items in stock!
Availability date:
This top quality 2 button flip key can be programmed to Suzuki Swift models from 2005 - 2010 which have the black plastic headed 2 button remote key shown in the photos. You must check the back of your original remote for the part details Calsonic Kansai Corp. TS002 as hsown in the photos.
The key will be pre-coded to suit this vehicle and the transponder chip must be programmed to the car using a diagnostic scan tool. We can do this for you at our East Victoria Park workshop in WA or you can use a licensed locksmith where you live. The remote part can be programmed to the vehicle using what is called a manual process and we will provide instructions on how to do this with your purchase.
This type of key has a separate ID46 transponder chip inside the front section of the key shell.
If your remote and chip are still working but the key shell is damaged you will see we also sell replacement key shells for this key.
These flip keys are very good quality and tend to be much stronger than the original plastic headed remote keys that come with the vehicle. The key blade on this flip key folds away and so it does not dig into your leg when the key is in your pocket.
The first photo shows a direct size comparrison between the 2 types of key so you can get an idea of the size of the flip key.
The flip key is supplied with a battery fitted and a key blade and roll pin. The key blade will need to be cut to match the vehicle and then it will need to be fitted to the flip key body using the roll pin supplied with it. Any locksmith will be able to do this for you if you have having it done locally where you live.
There is a recess on the back of the flip key where you can place a 14mm logo sticker if you wish but please note it is not supplied with one.
If you have any questions please feel free to get in touch with us.
WARNING! KEEP BATTERIES OUT OF REACH OF CHILDREN. Never allow children to replace button batteries on any device. Swallowing or placing a button cell battery inside any part of the body may lead to severe or fatal injuries in as little as 2 hours or less due to chemical burns and potential perforation of the oesophagus.
If you suspect your child has swallowed a button battery or placed inside any part of the body, immediately call the POISONS INFORMATION CENTRE on 13 11 26 for prompt advice. If your child is having any difficulty breathing, contact 000.
Dispose of used button/coin batteries immediately and safely. A battery can still be dangerous even when it can no longer operate the device. Place sticky tape around both sides of the battery and dispose of it immediately out of reach of children in an outside bin or recycle safely.
Please see button battery safety information from the Australian Competition & Consumer Commission (ACCC).
Frequency | 433.92 MHz |
No. of Buttons | 2 BUTTONS |
Shell Colour | CHROME & BLACK |
Button Colour | BLACK |
Remote Programming Method | DIAGNOSTIC TOOLS REQUIRED |
Transponder Programming Method | DIAGNOSTIC TOOLS REQUIRED |
Dimensions in mm (L x W x D) | 72 x 36 x 20 |
Battery Type | CR2032 - 3V |
LED Color | RED |
CR2032 is a 3 Volt battery and measures 20 mm x 20 mm x 3.2 mm Remote controls for garage doors, swing & sliding gates, home security systems, car alarms, central locking systems use lithium batteries. It is vital to select the correct battery both for fit and function of the device. One of, if not the most reliable lithium battery on the market is...
This service is to cut and program a key we are supplying to your vehicle. We do this for you at our workshop in East Victoria Park W.A. THE VEHICLE MUST BE HERE FOR US TO DO THIS SERVICE - IF YOU DO NOT LIVE IN PERTH YOU CAN PURCHASE A KEY OR REMOTE FROM US AND HAVE IT PROGRAMMED LOCALLY WHERE YOU LIVE
The B11 2 button flipkey uses a Standard Transmitter and is compatible where the original remote or flip key uses a Standard Transmitter. If your original remote has a Crystal Transmitter you need the B-Series Crystal flip-keys. Using our in-house tools we can generate a new remote and clone your transponder allowing you to get a flip-key for a fraction...
This carbon transponder chip can be known as an ID 46 - TP12 or PCF7936 Hitag 2. Used with many vehicles including Hyundai, Kia and Suzuki TP1 - DIAG
High quality Suzuki compatible flip key blade to suit a variety of aftermarket flip key bodies. Matches Silca HU133R or JMA SUZU-14 key profile. KD1
No customer reviews for the moment.