Superlift & Avanti genuine SDO-5 wireless keypad remote with plastic weather protection cover

Superlift make a range of motors and remote controls branded as Superlift or Avanti, Centurion, OZLift, Matador and this wireless keypad will work with all of those.

Here are some of the models of motor this wireless keypad is compatible with:

DPS D12/D20
MPS 21
N3588
RDO-3
RDO10
SDO-P
SDO-1
SDO-3 DC
SDO-4
SDO10
SDO-21 TP/BP
SDO-21 DPS
SDO-21 MPS
Slimfit RDO
T12/S12
T5/500
T6/600
T8/800

If you are using any of the remote cotrols shown in the attached photos, then this wireless remote keypad will work with the motor also.

The keypad uses 2 x CR2032 batteries for power and has an estimated use of 2000 transmissions. batteries are already fitted to the keypad and spare batteries can be ordered from the Compatible items tab below.

The buttons light up as soon as any button is pressed to make it easier to use at night. The keypad can be securely screwed to a wall or post and allows you to go out and in without having to carry keys or a remote.

Having a keypad can be a great solution with teenage kids so you do not have to keep replacing the remotes they lose.

The pin code can be between 1 - 8 digits and instructions are included with the keypad to explain how to set the code for each of the 2 channels.

As this is a 2 channel keypad you can use it with 2 roller or sectional garage doors or a door and a gate as long as all devices are compatible Avanti, Centurion, Ozlift, Matador or Superlift manufactured motors.

To program this keypad to your garage or gate motor follow the programming instructions for the motor and on the step where it says to press a button on the new remote you simply enter the pin code for the channel you wish to use on the keypad as described in the included instructions. 

It is a good idea to set your pincode first adn make a note of it before you pair the keypad with your garage door or gate.

The kit includes 2 screws and wall plugs to mount the key pad to a wall.

Once you open the front cover you will see a small slot near the number 7 button. Use a flat blade screw driver in this slot to lift the cover that fits arounf the buttons and you will see 4 small screws which secure the buttons to the back part of the case. Remove these 4 screws and you will be able to change the batteries or crew through the back plate to secure it to a wall.

Take a good look at the photos for more info on this.