ATA PTX -6V1 black garage remote with 4 grey buttons

PTX-6V1-BLK (W2-G2-P27-27A)

New product

The newest of the ATA PTX-6V1 variants is this one with either the black or grey case and 4 grey buttons. This remote can replace a bunch of older ATA remotes, including the grey or orange button PTX-5V2 & PTX-5V1.

THE BLACK & GREY PTX-6V1 REMOTES ARE INTERCHANGEABLE.

W2-G2-P27-27A

More details

$94.95 GST incl.

Shipping Rates

Due to the new battery safety laws here in Australia the ATA PTX-5V2 can no longer be sold and has been replaced by this upgraded PTX-6V1 remote. This new remote has a much more robust casing and has 2 screws in the back to secure it closed.

This remote uses 128 bit encryption for added security but otherwise works exactly the same and is backward compatible with all of those 64 bit encryption systems as shown in our photos. 

All TrioCode & TrioCode 128 Motors

Roller Door Motors

  • GDO6v3
  • GDO6v4
  • GDO8v3
  • GDO10v2
  • GDO10v3
  • And all other compatible TrioCode receivers and motor

Sectional Door Motors

  • GDO7v3
  • GDO9v2
  • GDO9v3
  • GDO11v1
  • And all other compatible TrioCode receivers and motor

Gate Motors

  • SGO1v3
  • SGO1v4
  • NES24v2
  • NES24v3

And all other compatible TrioCode receivers and motor

Take a look at the photos to see which other remotes are compatible with this one.
If you are not certain that the remote you have is compatible please feel free to email us a photo of the remote and your motor and we will be more than happy to help you work out which remote to purchase.

All our remotes are supplied with easy to follow instructions on how to program them to your garage or gate motor. To ensure you get the most appropriate instructions please tell us the model of the motor you are going to use the remote with in the comment section of the checkout.

We offer a 12 Month Warranty on all genuine remotes in line with the manufacturer conditions, so you can buy your new remote with full peace of mind and confidence that should there be a problem you are covered.

If you have any issues during programming please call us and we will talk you through it. We can also come and program your new remote anywhere across the Perth metro area just select Deliver and Program as your preferred delivery method at Checkout.

This product complies with Consumer Goods (Products Containing Button/Coin Batteries) Safety Standard 2020.

WARNING! KEEP BATTERIES OUT OF REACH OF CHILDREN. Never allow children to replace button batteries on any device. Swallowing or placing a button cell battery inside any part of the body may lead to severe or fatal injuries in as little as 2 hours or less due to chemical burns and potential perforation of the oesophagus.

If you suspect your child has swallowed a button battery or placed inside any part of the body, immediately call the POISONS INFORMATION CENTRE on 13 11 26 for prompt advice. If your child is having any difficulty breathing, contact 000.

Dispose of used button/coin batteries immediately and safely. A battery can still be dangerous even when it can no longer operate the device. Place sticky tape around both sides of the battery and dispose of it immediately out of reach of children in an outside bin or recycle safely.

Please see button battery safety information from the Australian Competition & Consumer Commission (ACCC).

Frequency 433.92 MHz
No. of Buttons 4 BUTTONS
Shell Colour BLACK
Button Colour GREY
Remote Programming Method LEARN TO RECEIVER
Encryption Type ROLLING CODE
Visor Clip Included OPTIONAL EXTRA
Dimensions in mm (L x W x D) 74.5 x 38.5 x 13
Battery Type CR2032 - 3V
LED Color RED
  • $8.95 In Stock

    CR2032 is a 3 Volt battery and measures 20 mm x 20 mm x 3.2 mm Remote controls for garage doors, swing & sliding gates, home security systems, car alarms, central locking systems use lithium batteries. It is vital to select the correct battery both for fit and function of the device. One of, if not the most reliable lithium battery on the market is...

    $8.95
    In Stock
  • $9.95 In Stock

    This genuine Boss remote holder can be used as a sun visor clip and can hold a number of different remote controls as shown in the photos. The holder can be screwed to a wall as a wall mount or using the wire clip included can be attached to the sun visor of your vehicle. W4

    $9.95
    In Stock
  • $39.95 In Stock

    This stylish aftermarket remote can replace the ATA PTX5 V2 which is this one with the black case and 4 grey buttons. This remote can replace a bunch of older ATA remotes, including the orange button version also. See photos for more info. G6 - P27-27A

    $39.95
    In Stock
  • $79.95 In Stock

    The Chamberlain MC100AML can be used to replace a number of other remotes including: Merlin M842 - C945 - E945M - E960M - E950M ATA PTX4 - PTX5 - PTX2 B&D TB5 - TB6 Superlift TX4 - Eurotx See photos for more info. G56 - INCL

    $79.95
    In Stock
  • $94.95 In Stock

    The newest of the ATA PTX-6V1 variants is this one with the either grey or black case and 4 grey buttons. This remote can replace a bunch of older ATA remotes, including the grey or orange button PTX-5V2 & PTX-5V1. THE BLACK & GREY PTX-6V1 REMOTES ARE INTERCHANGEABLE. W2-G2-P27-27A

    $94.95
    In Stock
  • $27.95 In Stock

    Here we have a genuine replacement shell or case for the newest release ATA PTX-6V1 black garage and gate remote control. This remote shell can also be used on the earlier model PCBs including: PTX-5V2PTX-5V1 NO CIRCUIT BOARD OR BATTERY INCLUDED - SHELL ONLY S30

    $27.95
    In Stock

No customer reviews for the moment.

Write a review

ATA PTX -6V1 black garage remote with 4 grey buttons

ATA PTX -6V1 black garage remote with 4 grey buttons

The newest of the ATA PTX-6V1 variants is this one with either the black or grey case and 4 grey buttons. This remote can replace a bunch of older ATA remotes, including the grey or orange button PTX-5V2 & PTX-5V1.

THE BLACK & GREY PTX-6V1 REMOTES ARE INTERCHANGEABLE.

W2-G2-P27-27A

Compatible Items

Follow us on Facebook

Brands