TMT Automation Inc PR7 - 4 button black swing or sliding gate remote

The TMT Automation PR7 remote control can be programmed to a number of different TMT Automation branded swing or sliding gate motors using the fitted receiver in the gate control panel or the optional external receiver. 

This remote features a new design and feel more robust then the older PR3-003 remote which had the 4 round silver buttons and the later model PR4 remote. The keyring loop is metal and has a screw in the back to hold the case together so it feels more solid.

The TMT PR47 has an On/Off switch like the PR4 on the side of the remote which helps to prevent unwanted or unintentional activation of the gate while the remote is in your bag or pocket. Turning the remote off will stop the main buttons from operating. It can be switched back on immediatley by flickig the side switch upwards.

In terms of size the old PR3 remote measured 68 x 33 x 11 and the PR4 remote measured 67 x 37 x 11 witht he PR7 measuring very similarly at 66 x 37 x 13.

The buttons on the new PR7 are large and have raised dots as numbers from 1 to 4 and have a very positive responsive feel when pressed.

A clip which can be used as a visor clip of wall mount clip is included with the remote. YOu can see what is looks like in the attached photos.

Programming this TMT PR7 remote will depend on which receiver unit is fitted to your system so best to let us know when you order or send us a photo and we can advise on how the remotes can be programmed. Please let us know if the gate is a swing or sliding gate. TMT use dog breeds to name many of their gates including the Terrier, Mastiff & Boxer.

With a swing gate the controller is normally fitted in a grey plastic box next to the gate on a wall or pier. Inside this box you will see the control board and these are normally CB16, CB17, CB18 or CB19 and you should see the code printed on the control board. Of course if you are not sure just send us a photo of the control board and we will help you identify which one you have.

If you are not certain that the remote you have is compatible please feel free to email us a photo of the remote and your motor and we will be more than happy to help you work out which remote to purchase.

All our remotes are supplied with easy to follow instructions on how to program them to your garage or gate motor. To ensure you get the most appropriate instructions please tell us the model of the motor you are going to use the remote with in the comment section of the checkout.

We offer a 12 Month Warranty on all genuine remotes in line with the manufacturer conditions, so you can buy your new remote with full peace of mind and confidence that should there be a problem you are covered.

If you have any issues during programming please call us and we will talk you through it. We can also come and program your new remote anywhere across the Perth metro area just select Deliver and Program as your preferred delivery method at Checkout.

This product meets AS/NZS 62368.1 Clause 4.8 Safety Standards 2020 for products containing button/coin batteries.

WARNING! KEEP BATTERIES OUT OF REACH OF CHILDREN. Never allow children to replace button batteries on any device. Swallowing or placing a button cell battery inside any part of the body may lead to severe or fatal injuries in as little as 2 hours or less due to chemical burns and potential perforation of the oesophagus.

If you suspect your child has swallowed a button battery or placed inside any part of the body, immediately call the POISONS INFORMATION CENTRE on 13 11 26 for prompt advice. If your child is having any difficulty breathing, contact 000.

Dispose of used button/coin batteries immediately and safely. A battery can still be dangerous even when it can no longer operate the device. Place sticky tape around both sides of the battery and dispose of it immediately out of reach of children in an outside bin or recycle safely.

Please see button battery safety information from the Australian Competition & Consumer Commission (ACCC).