MLFI-16.P12 (S27)
New product
Fiat compatible 3 button flip key case for when your key shell is broken but the electronics still work.
FLIP KEY CASE ONLY - NO ELECTRONICS INCLUDED
We charge an additional $50 to cut the new key and swap over all the electronics.
S27
Warning: Last items in stock!
Availability date:
Please check the photos carefully as this CAR version of the keyshell has different symbols on the buttons to the flip key case used with Fiat vans.
The symbols on this key are the standard looking LOCK - UNLOCK - VAN as used with Fiat vans including:
FIAT DUCATO ZFA244
Fiat flip key shells like these are delicate and tricky to take a part. You should definitely take your time and check the attached photos carefully for the steps to doing this. You can also bring your broken key to us and we will happily swap over the electronics and cut the new keyblade to match your old key.
This key shell has a key blade matching the Silca SIP22 profile.
We charge $50 extra to cut the key, swap over the electronics and test it all at the end.
The steps to disassemble your key are as follow:
1. Remove the battery cover and battery
2. Remove the logo sticker on the back to expose the screw
3. Remove the screw
4. Separate the front and back sections of key part
6. Carefully remove the transponder chip and place it in the slot in the new key.
7. Carefully remove the circuit board and place it in the new key.
8. Assemble the new shell in reverse order to the steps above and tension the
flip spring by turning the back section anti-clockwise.
WARNING! KEEP BATTERIES OUT OF REACH OF CHILDREN. Never allow children to replace button batteries on any device. Swallowing or placing a button cell battery inside any part of the body may lead to severe or fatal injuries in as little as 2 hours or less due to chemical burns and potential perforation of the oesophagus.
If you suspect your child has swallowed a button battery or placed inside any part of the body, immediately call the POISONS INFORMATION CENTRE on 13 11 26 for prompt advice. If your child is having any difficulty breathing, contact 000.
Dispose of used button/coin batteries immediately and safely. A battery can still be dangerous even when it can no longer operate the device. Place sticky tape around both sides of the battery and dispose of it immediately out of reach of children in an outside bin or recycle safely.
Please see button battery safety information from the Australian Competition & Consumer Commission (ACCC).
No. of Buttons | 3 BUTTONS |
Shell Colour | BLACK |
Button Colour | BLACK |
Dimensions in mm (L x W x D) | 64 x 34 x 18 |
Battery Type | CR2032 - 3V |
CR2032 is a 3 Volt battery and measures 20 mm x 20 mm x 3.2 mm Remote controls for garage doors, swing & sliding gates, home security systems, car alarms, central locking systems use lithium batteries. It is vital to select the correct battery both for fit and function of the device. One of, if not the most reliable lithium battery on the market is...
No customer reviews for the moment.