Hiland K5004 rolling code wireless remote key with black fascia

Many of the Hiland remote controls systems can be used in either fixed code mode or rolling code and this rolling code wireless keypad suits any of the Hiland rolling code receivers. These K5004 keypads come in black and the K5003 comes in white and both operate exactly the same. The keypad is illuminated for easy use at night and has a weather resistant cover over the buttons which snaps closed for a good seal.

The keypad can be used indoors or outside but to prolong its life it is always bes to install in in a position that is not completely open to the weather.

If your remote matches one of the model numbers listed in the table below and it is working in rolling code mode, then this wireless keypad will also work with the receiver on the system. Hiland produce their remotes both with or without the Hiland logo and so your remote may not feature the logo but check the circuit board and you will see if the Part number matches a model in this list.

These Hiland remotes that can be used along with the K5003 keypad:

One example of this is the remote controls used by many garage door or gate companies such as ASAP Garage Doors or Commlink here in Perth The back of the remote has a different part number and features a website address for the garage door company but the circuit board clearly says Hiland. 

If you are not certain that this keypad is compatible with your setup please feel free to email us a photo of the remote circuit board and your receiver which is wired to the garage or gate motor and we will be more than happy to help you work out which remote to purchase. Hiland receivers are small and usually in a white plastic cover.

All our remotes are supplied with easy to follow instructions on how to program them to your garage or gate receiver. 

Receiver units compatible with this wireless keypad include:

R5101 - maximum 30 remotes

R5102 - maximum 30 remotes

R5103 - maximum 300 remotes

R5104 - maximum 300 remotes

This remote is also compatible with the universal 433 MHz receiver we sell on this site and can be used as a kit for older motors where a compatible remote is no longer available. 

This keypad it secured to the backing plate using a key lock. Every keypad has a unique key barrel marked with a 4 digit number. This number is also engraved on the lock of the keypad. Each keypad is supplied with 2 keys included.

PLEASE STORE YOUR KEYS SEPARATELY & SAFELY 

We offer a 12 Month Warranty on all genuine remotes in line with the manufacturer conditions, so you can buy your new remote with full peace of mind and confidence that should there be a problem you are covered.

If you have any issues during programming please call us and we will talk you through it. We can also come and program your new remote anywhere across the Perth metro area just select Deliver and Program as your preferred delivery method at Checkout.

WARNING! KEEP BATTERIES OUT OF REACH OF CHILDREN. Never allow children to replace button batteries on any device. Swallowing or placing a button cell battery inside any part of the body may lead to severe or fatal injuries in as little as 2 hours or less due to chemical burns and potential perforation of the oesophagus.

If you suspect your child has swallowed a button battery or placed inside any part of the body, immediately call the POISONS INFORMATION CENTRE on 13 11 26 for prompt advice. If your child is having any difficulty breathing, contact 000.

Dispose of used button/coin batteries immediately and safely. A battery can still be dangerous even when it can no longer operate the device. Place sticky tape around both sides of the battery and dispose of it immediately out of reach of children in an outside bin or recycle safely.

Please see button battery safety information from the Australian Competition & Consumer Commission (ACCC).