TX-89 single button Antitheft Car Alarm remote by Lintek

This simple looking single round button remote has no marking on the outer case. The PCB is marked with Lintek TX-89 which is the only identifying marking on it.

Please study the attached images carefully to ensure your remote matches exactly to this one. The remote was used with an old car alarm system distributed by Antitheft Car Alarms Australia.

The code on each system is fixed and unique. The code is set by a series of solder bridges on the back of the PCB.

We solder this series of bridges before sending our the remote so it will work straight away. When placing your order you will need to email us a clear photo of the back of your working remote so we can copy the solder bridge sequence.

If you lose your only remote then we cannot assist as there is no way to know the correct sequence. 

We also sell replacement cases for this remote and you will find this item listed below under the Compatible Items tab.

WARNING! 

This product uses an alkaline battery and so it is exempt from the AS/NZS 62368.1 Clause 4.8 Safety Standards 2020. 

Alkaline batteries are hazardous and should be kept out of reach of children at all times. 

Alkaline batteries may explode or leak causing injury if not used correctly. Do NOT recharge, do NOT dispose of batteries in a fire, do NOT install batteries incorrectly, do NOT mix new with used batteries, do not short circuit, do not ingest, do not mix with other types of batteries. 

Where possible please ensure you recycle used alkaline batteries safely