SAN-CH-V4-2BTN (A5 BACK)
New product
This oval 2 black button remote from Sanji Intellica is the latest release and replaced the older grey button RKS03 (TXSAN-CH-V3), AT120 (TXSAN-CH-V3) and TX HYDX V3.
This remote has the part number TX SAN-CH V4 on the circuit board.
The frequency (433 MHz) will be printed on the small metal transmitter in the middle of the board.
This remote uses a rolling code.
A5 - B6-C6 INSTRUCTIONS
Warning: Last items in stock!
Availability date:
The previous version of this remote, the RKS03 (TX-SAN-CH-V3) had grey rubber buttons and otherwise looked identical to this one.
This remote works in exactly the same way and is programmed to the vehicle in the same way also. The improvements made have now made this a very reliable compact remote. You will see in the photos which remotes can be replaced by this one.
To ensure the remote you have is compatible with this one here and works on 433.92mhz you will need to remove the screws from the back of the remote and open it up. On the circuit board you will see the transmitter as shown in the photo. This should have 433 engraved on it.
Many of our remotes fobs such as this one here can be programmed to your vehicle yourself and we are happy to provide instruction on how to do this. The instructions will usually have pictures of which buttons to press in the car or very specific instructions on what you need. In almost all cases this takes less than 5 minutes to complete and some remotes can take as little as 2 minutes to program to your car.
If you have any issues during programming please call us and we will talk you through it. If you are not confident about programming the remote yourself just select the Click & Collect delivery option and then bring your car to our shop during business hours and we will program the remote for you.
If you are not certain that the remote you have is compatible please feel free to email us a photo of the remote and some details of your vehicle such as Year – Make - Model and we will be more than happy to help you work out which remote to purchase. Take a look at the Compatible Items tab below to see what other options there are for replacing this remote. Where you wish to integrate your remote and key into a flip key this will need to be done at our shop as we do not have a mobile key cutting service.
To ensure you get the most appropriate instructions please tell us the model of vehicle you are going to use the remote with in the comment section of the checkout.
We offer a 12 Month Warranty on all genuine remotes in line with the manufacturer conditions, so you can buy your new remote with full peace of mind and confidence that should there be a problem you are covered.
WARNING! KEEP BATTERIES OUT OF REACH OF CHILDREN. Never allow children to replace button batteries on any device. Swallowing or placing a button cell battery inside any part of the body may lead to severe or fatal injuries in as little as 2 hours or less due to chemical burns and potential perforation of the oesophagus.
If you suspect your child has swallowed a button battery or placed inside any part of the body, immediately call the POISONS INFORMATION CENTRE on 13 11 26 for prompt advice. If your child is having any difficulty breathing, contact 000.
Dispose of used button/coin batteries immediately and safely. A battery can still be dangerous even when it can no longer operate the device. Place sticky tape around both sides of the battery and dispose of it immediately out of reach of children in an outside bin or recycle safely.
Please see button battery safety information from the Australian Competition & Consumer Commission (ACCC).
Frequency | 433.92 MHz |
No. of Buttons | 2 BUTTONS |
Shell Colour | BLACK |
Button Colour | BLACK |
Remote Programming Method | IN CAR PROGRAMMABLE |
Encryption Type | ROLLING CODE |
Dimensions in mm (L x W x D) | 55 x 36 x 11 |
Battery Type | 2 X CR1220 3V |
LED Color | RED |
This oval 2 grey button remote from Sanji Intellica is becoming more difficult to get hold of. It can replace the other models including the popular TX SAN-CH V4. There is an identical looking remote on 303.92mhz so best to check the board in the remote. The frequency will be printed on the small metal transmitter in the middle of the board. A5 - BACK
This genuine Sanji Intellica shell can be used to replace a number of the 2 button remotes. This shell is only available in black with black buttons but can be used to replace the grey or blue button versions also. NO CIRCUIT BOARD OR BATTERY INCLUDED - SHELL ONLY S48
No customer reviews for the moment.